LED-lighting strip halogen- and siliconfree

Description of product

The easy connect LED120hf-shaft lightings are characterised by a halogen– and siliconfree jacket material. Even the 10 m-power supply cord is produced with halogenfree materials. Thus the dispersion of toxic burnt gases is suppressed right from the beginning and the silicontypical evaporations are avoided.

The lighting strip is robust but still flexible. It is offered with a clear jacket due to the selected materials.

The printed circuit board is equipped with 120 high efficient LED-chips per meter.

The connection set contains a semiconductor protection against highest stress peaks in the power supply network and a line fuse. A spare fuse is part of the delivery.

All components meet the CE-, RoHS– and REACH– guidelines as well as all requirements of the European lift standard EN 81-20. This is achieved by the use of lead-free components, materials and production processes.

Typical illumination diagram [lx] for 4 and 18 m²-shaft area (light reflections from the shaft walls are not considered)

The large number of LEDs and the shape of the jacket enable a wide angle of radiation. As a matter of fact the illumination of the shaft is outstanding without any horizontal shadows.

The LED-shaft lighting meets the requirements of protection class IP65. Higher protection classes are available on request.

Installations up to a length of 75 m are possible with one strip; in particular cases up to 100 m.

The lighting strip is characterised by a low power consumption resulting in a low operating temperature. This enables a very long service life.

The colour temperature of around 5.000 K generates a neutral light very close to daylight. This neutral light and the high colour rendering index (CRI) of the LED-chips lead to a neutral reproduction of colours of all components and devices in the shaft.

Electrical connection is achieved by insertion of the shaped plug in a standard 230 VAC socket. Thus a bright illumination of the shaft is available right from the start of the construction.

Halogen- and siliconfree jacket material
→ no dispersion of toxic gases in the case of fire
→ low smoke generation
→ no silicontypical evaporations

Large number of LEDs enables a wide radiation
→ higher illumination in the shaft
→ all-over illumination of the shaft without shadows
→ reduces direct dazzling

Deployment of ultra-high performance LED-chips
→ highest degree of illumination
→ minimum power consumption

Key features at a glance

Reduced generation of heat
→ increases service lifetime

Robust construction and reinforced jacket material
→ reduces damages due to improper handling

LED-connection box with semiconductor protection
→ protects the LED-lighting strip against stress peaks

LED-connection box with fuse
→ protects the feed-line of the LED-lighting strip

Technical data

Input voltage230 – 240 VAC
Configuration120 LEDs per meter
Angle of radiation> 160 degree
Temperature of the lightapprox. 5,000 K
Service life (mttf) at 25 °C environmental temperatureapprox. 50,000 hours
Average vertical illumination (1 m-distance)> 300 lx
Maximum length 75 m, separably in meter
Temperature range-20 °C to +50 °C
Power consumption< 8 W per meter
Weight< 100 g per meter
Safety class / degree of protectionIP65 / 2
Material of jackethalogen- and siliconfree
Burning characteristicself-extinguishing
Pre-fuse 6 to 16 A

You will find an abstract and a short summary of all technical features in the data sheet.

Orders can be placed directly by e-mail: order@switch-gmbh.de

The order form is available here.

Purchase requisition

Please contact Switch helpdesk for any further question.
Phone: +49 511 616 59 60-0
We will advise you willingly.