easy connect LEDplus with control unit

Switch GmbH & Co. KG is proud to offer now the complete system exceeding the new European safety Regulation EN81-20 In addtion to the easy connect LEDplus shaft lighting a control unit is now available.

The unit provides the power for emergency light as well as the necessary electronic system suitable for the LED shaft lighting with emergency light function. The unit monitors continuously the main power supply and will switch immediately to the emergency light in case of a breakdown of the main power.
The box includes the rechargeable batteries and the charging unit for the low voltage circuit.

The maximum operating time of the emergency light is depending on the height of the shaft respectively the length of the LED-strip.

Switch GmbH & Co. KG offers two variants depending on the area of operation and the required capacity of the rechargeable batteries. It is self-evident that both versions meet the requirements of the European regulation:

1. Heavy duty  version
In general this Switch emergency light power supply provides an emergency light up to 3 hours. It meets the strong British building standards in addition to the safety regulation EN81-20.
The electronic system is built in a powdercoated metal box. The box is equipped with a solid interlock. The necessary key is part of the delivery.
A voltage warning sticker is glued to the cover.
A test button is embedded in the cover. It allows to test the correct operation of the emergency light.

2. SlimLine version
This Switch complete solution offers an emergency light of more than one hour and thereby exceeding the European safety regulation. The electronic is placed in a solid plastic box, which meets the protection class IP66.

Technical data 
Input power230 - 240 VAC
Output power / main power supply230 - 240 VDC
Output power / emergency light24 VDC
Average duration of emergency light> 3 hours
Power consumption emergency LED light strip0.6 W/m, max. 25 W/50 m
Material of the boxPolysterene
Housing protection classIP66
Temperature range-20°C up to +50°C
Dimensions (Width x Height x Depth)255 x 180 x 110 mm
Weightapprox. 4.1 kg
Fuse for plug socket of pit bottom box10 A

The Switch electronic system can be placed in the engine room, on top of the cabin or in the shaft.

Please contact Switch GmbH & Co. KG for further information and technical data.