easy connect LEDplus for the car top
Switch GmbH & Co. KG is proud to offer short LED-lightbands with emergency light function which can be installed very easily on top of the car or in the pit. These solutions are based on the well known LED-technology of the Switch shaft lighting.
It is self-evident that all requirements of the new European regulation EN 81.20 are met.
The LED-lightbands offer the well-tried 2 in 1-technique:
A regular lighting with 230 VAC power supply and an emergency lighting with a 12 or 24 VDC power supply.
In this case an available emergency power supply of the cabin light can be used due to the low power consumption of the LED-strip.
The easy connect LEDplus system can be installed quite fast and easily providing a high degree of free moving capacity to the service technician; no cables on the cabin roof, no dangerous tripping points. Both hands are free for the necessary maintenance.
The easy connect LED-Lightbands are delivered ready for connection with a small plastic box.
Optionally pre-assembled Molex-connectors can be provided.
|Power supply / main lighting||230 - 240 VAC||230 - 240 VAC|
|Power supply / emergency lighting||12 VDC||24 VDC|
|Length of LED-strip||1 Meter||1 Meter|
|Length of LED connecting cable||0.4 Meter||0.4 Meter|
|Burning characteristic||self extinguishing||self extinguishing|
|Power consumption emergency lighting||80 mA||30 mA|
|Lifetime (mttf) approx.||50,000 hours||50,000 hours|
|Material connection box||Polystyrene||Polystyrene|
|Dimensions (L x W x H)||88 x 88 x 53 mm||88 x 88 x 53 mm|
|Degree of protection||IP65||IP65|
|Temperature range||-20°C up to +60°C||-20°C up to +60°C|