easy connect LED120
- Product description
- Key features at a glance
- Technical data
- Safety instructions
- Order information
The easy connect LED 120-shaft lighting is based on best available technology. It is the result of permanent further developments of the proven easy connect LED light strips.
The new LED-shaft lighting consists of an extreme robust but still flexible PVC LED-light strip, a connection box with rectifier and a 10 m power supply cord with shaped plug.
The connection set contains a semiconductor protection against stress peaks and a line fuse. A spare fuse is part of the delivery.
The flexible conductor path inside the rectangular light strip is equipped with 120 LEDs per meter with highest luminous intensity.
It is self-evident that the printed circuit board meets the RoHS-directive.
The large number of LEDs and the shape of the jacket enable a wide angle of radiation with reduced dazzling effect. As a matter of fact the illumination of the shaft is outstanding without any horizontal shadows.
In this regard the LED-shaft lighting meets the requirements of protection class IP65.
Installations up to a length of 70 meter are possible with one strip.
The LED-shaft lighting is sufficient for shafts with large size of floor space, such as lifts for more than 20 people.
The LED-strip is equipped with state of the art LEDs. This guarantees highest intensity of light with lowest power consumption. Thus the LED-strip achieves the power efficiency class A+.
The very low operating temperature of the LED-strip enables a very long service life even under continuous operation.
The temperature of the light of around 4000 K generates a neutral light very close to daylight. The neutral light increases the colour rendering index (CRI). The CRI of more than 80 is close to daylight. It leads to a neutral reproduction of colours of all components and devices in the shaft.
Electrical connection is achieved by insertion of the shaped plug in a standard 230 VAC socket. So everybody is able to assemble it with no need of the special knowledge of an electrician. Thus a bright illumination of the shaft is available right from the start of the construction.
The LED-shaft lighting is approved and certificated according to CE, RoHS and EN 81.
The LED-shaft lighting can be extended with the proven pit bottom- and engine room control box to a complete shaft lighting system. The system can be pre-assembled at Switch GmbH & Co. KG according to customer needs.
Key features at a glance
- Large number of LEDs enables a wide radiation
- Large number of LEDs per meter
- The printed circuit board is RoHS compliant
- Deployment of ultra high performance LEDs
- Reduced generation of heat and larger cooling surface per LED
- Neutral colour of the LEDs
- Robust construction and reinforced jacket
- LED-connection box with semiconductor protection
- LED-connection box with fuse
→ higher illumination in the shaft
→ all-over illumination of the shaft without horizontal shadows
→ reduced direct dazzling
→ easy to be recycled
→ highest degree of illumination
→ minimum power consumption
→ increases service life
→ applicable for long-term usage
→ natural colour rendering of all components in the shaft
→ prevents damages due to improper handling
→ protects the rectifier against stress peaks in the main power supply
→ protects the feed-line of the LED-light strip
|Input power||230 - 240 VAC|
|Configuration||120 LEDs per meter|
|Angle of radiation (50 lx-width)||> 150 degree|
|Color temperature||4,000 - 5,000 K|
|Service life (mttf) at Ten = 25 °C||approx. 50000 hours|
|Average vertical illumination (measured at 1 m-distance)||> 300 lx|
|Maximum length||70 m, divisible in 1 meter|
|Supply cord||10 m with shaped plug|
|Operating temperature||-20 °C to +50 °C|
|Power consumption||< 7 W per meter|
|Dimensions (width x height)||12 mm x 7 mm|
|Burning characteristics||Self extinguishing|
- Please take care of the right power supply voltage of 220 – 240 VAC.
- A pre-fuse of 6 to 16 A has to be provided for the LED-lighting strip.
- The maximum length of the strip is 70 m. Any additional LED-strip requires a separate power supply.
- Please make sure that the PVC-coat is not damaged. Otherwise a short circuit may appear.
- Do not execute any electrical installation while the strip is energised.
- Do not bend or squeeze the strip.
- Please handle the strip and the electronic devices with care to avoid any damages like broken printed circuits.
All too often LED-light strips are treated like cable during installation, which might lead to a damage of the conductor path. Therefore special attention was drawn to increase the durability of the LED- light strip during installation.
The weight of 100 g per meter of the easy connect LED120-light strip is top class of shaft lighting system. A complete shaft lighting for a shaft height of 25 meter weighs only 2.7 kg. This permits a very easy handling, from manufacture and transport all the way to the mounting.
The LED strip is attached simply and quickly to the shaft wall with the 6 mm dowel and cable-ties. These parts are include in the delivery.
The LED shaft light can be fed either from the pit or from the shaft ceiling taking into account a maximum distance of 50 cm. The strip is fixed downwards by using the special 6 mm dowels and cable ties starting at the topmost position of the shaft. A dowel distance of approx. 2 to 3 m has to be taken into account.
Orders can be placed directly
by e-mail: order@switch-GmbH.de
by fax: The order sheet is available in our download section.
Please contact Switch helpdesk for any further question: +49 511 616 59 60-0.
We will advise you willingly.